steel forging steel 718 forging

steel forging steel 718 forging

steel forging steel 718 forging suppliers, distributors, production and supply of steel forging steel 718 forging, are committed to providing high-quality products, as well as excellent cutting, forming, drilling and other processing services. If you have any needs, please feel free to contact:

[email protected]


steel forging steel 718 forging

Alloy 718 also has excellent creep-rupture strength. This particular exotic alloy has excellent weldability and machining capabilities. By hot working inconel 718, it improves the overall strength during the forging process. If inconel 718 is going to be forged, machined, or welded, it starts out in mill-annealed or stress-relieved condition. The Microstructure and Mechanical Properties of Inconel forging processes, such as hot die forging, insulation die forging and isothermal forging, have been developed to manufacture fine grains forgings. The products of these processes have been applied significantly in new power units [4-6]. Inconel 718 alloy fine grain ring forgings which were used to manufacture a key part of one new power unit. Rickard Metals Inconel 718Inconel 718 Bar Forgings Inconel 718 (UNS N07718) is the most widely used superalloy, accounting for approximately one-third of all superalloy production. IN718 has excellent strength, ductility, and toughness throughout the range -423 to 1300F. A major attribute of Inconel 718 is its processing versatility. It can be fabricated over a wide range of temperatures, Nickel Alloy 718, Inconel® 718 - Continental Steel & Tube Continental Steel is a distributor of alloy 718 in pipe, tube, sheet, strip, plate, round bar, flat bar, forging stock, hexagon, wire, and extruded section. In addition, the mills that Continental Steel works with to supply alloy 718 meet or exceed industry standards from such leading organizations as, ASTM, SAE, ASME, AECMA PrEN, DIN, and ISO. Inconel Forging - Inconel Alloy Properties and

Turning and Milling [5 Sets]

Turning-and-Milling
Technical Data Wuzhong Double Column Wuzhong Double Column Schess
Height 5000mm 6000mm 6500mm 3000mm
Load Bearing 160t 400t 600t 50t
Table Diameter Φ7200mm Φ10000mm Φ10000mm Φ3500mm
Max. machining Diameter Φ8000mm Φ12500mm Φ22000mm Φ4000mm
Simultaneous 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 5-Axis Simultaneous Motion

Multi-Drilling Machine [32Sets]

Multi-Drilling Machine
Technical Parameters INNSE Italy Shenyang Machine Tool GDC60130MD, GDC3070MD DAE-YANG South Korea
X-axis, Y-axis, Z-axis 8000 4500 1000mm 13000 6000 500mm 7000 3000 500mm 6000 6000 800mm
Boring Diameter ≤Φ120mm ≤Φ100mm ≤Φ100mm Φ2 -Φ 100mm
Processing Depth ≤420mm ≤300mm ≤200mm ≤400mm

For more information, please contact:
[email protected]

Vertical Lathe [10 Sets]

Vertical Lathe
Technical Data Wuzhong Wuzhong Qizhong Qizhong Qizhong
Table Diameter Φl600mm Φ3150mm Φ3600mm Φ4000mm Φ4000mm
Max. Machining Diameter Φ2000mm Φ3500mm Φ4000mm Φ5000mm Φ5000mm
Height 1600mm 2500mm 2000mm 2500mm 4000mm
Load Bearing 5t 40t 32t 50t 50t

Floor-type Milling-boring Machine [11 Sets]

Floor-type Milling-boring Machine
Technical Data Wuzhong Wuzhong Pama
X axis
Y axis
(Z+W) axis
12000
4000
(800+800) mm
16000
5000
(1200*1200)mm
12000
3000
(1200+1000)mm
Table Size 3000*3000mm 4000*4000mm 3600*4000mm
Load Bearing 60t 100t 65t
Boring Bar Dia Φ160mm Φ200mm Φ160mm

Technical Data Pama INNSE260 INNSE280
X axis
Y axis
(Z+W) axis
20000
5000
(1200+1000)mm
17500
6000
(1400+1600)mm
25700
8000
(1800+2000)mm
Table Size 4000*4000mm 3500mm*5000mm 5000mm*9000mm
Load Bearing 100t 100t 250t
Boring Bar Dia Φ180mm Φ260mm Φ280mm

For more information, please contact:
[email protected]

Portal-type Processing Center [16 Sets]

Portal-type Processing Center
Technical Data Schess, German Okuma, Japan Wuzhong Double Column Youjia(FV4224E) Youjia(FV3215)
Height 7000mm 1850mm 3000/1750mm 5000/2000mm 1170mm 970mm
Width between Columns 8000mm 3050mm 4300mm 6000mm 2400mm 1600mm
Length 50000mm 5000mm 20000mm 28000mm 4200mm 3200mm
Table Size 8000*40000mm 2500*4800mm 3000*26000mm 5000*30000mm 2000*4000mm 1400*3000mm
Rotary table Diameter Φ6000mm —— ——
Simultaneous 7-5 Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion
Technical Data Mitsubishi I II III, Japan
Height 1950mm 1950mm 2550mm
Width between Columns 4250mm 4250mm 3800mm
Length 10200mm 8200mm 6200mm
Table Size 3500*10000mm 3500*8000mm 3000*6000mm
Rotary table Diameter
Simultaneous 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion

Deep-Hole Drilling Machine [11 Sets]

Deep-Hole Drilling Machine
Technical Parameters INNSE Italy DAE-YANG South Korea
X-axis, Y-axis, Z-axis 6000 4500 1100mm 4000 3000 1000mm
Boring Diameter ≤Φ60mm Φ16-Φ80mm
Processing Depth ≤1000mm ≤1000mm

For more information, please contact:
[email protected]

Contact us